It adheres to various types of materials, such as rubber compounds, EPDM, nitrile rubber, neoprene, EVA and Viton. It is a multipurpose adhesive, widely used in the furniture sector and the industrial sector.
It is a single-component product and does not require mixing. The curing process begins when a thin layer of adhesive is applied between the surfaces coming into contact with atmospheric air moisture.
HOW TO USE:
To obtain a satisfactory result, the surfaces must be clean, free of oil and dirt. A thin layer of adhesive should be applied to only 1 (one) of the substrates to be glued, because the excess impairs the good performance of the bonding.
After applying the adhesive, it is necessary to hold the parts for approximately 20 seconds, when the initial curing will be completed and the part can be handled safely. Total healing will take place in 24 hours.
This adhesive is suitable for clearances of up to 0.10mm.
Excessive glue impairs gluing. Glue the skin and eyes in a few seconds. Keep out of the reach of children.
The polymerization of cyanoacrylate generates heating. Depending on the amount spilled on the clothes, the temperature rises enough and can cause burns.
Viscosity (cP): 80 to 120
Working Temperature (oC): -55 to 80
Clearance Fill (mm): Up to 0.10
Shear Resistance (Steel x Steel): ≥ 100Kgf/cm2